The continuous mesh belt jet veneer dryer or band dryer or mesh dryer which is one of the main equipments in veneer and plywood production and can be used for continuous drying operation. It is used for drying veneers with rotary cutting and slicer and it is designed especially to dry the very thin face veneer typically at 0.2-1.2mm thickness. It is composed of four parts, which are divided into feeding area, heating area, cooling area and discharging area. It has features of high efficiency, low energy consumption, and better meets the production process of the product. 

The drying capacity of 40m 2 deck dryer can achieve 2.5m³ per hour. The composite cost of Shine biomass veneer drying machine is only USD 6-12/per cubic meter.

20m 2 Deck Veneer Roller Dryer running without Thermic Oil Heater or Steam Boiler has the drying capacity 0.8-1.1m3/h. It uses waste wood / Briquette fired Air Heater-Biomass Burner. It eliminates heat loss by directly heating air and supplying to dryer instead of indirect heating of Oil or water. Ofcourse, the veneer roller dryer can run on steam boiler or thermal oil heater too.

The single deck 40m veneer roller dryer running on Biomass Burner has the capacity of 1.5m3/h. The heating section is 36m divided into 9 sections and cooling section 4m one section. The biomass burner is the patented product and it can burn waste wood directly to heat air and supply to the dryer. The composite drying cost is only USD 6-11/m3.      

Shine 28m 2 deck wood veneer dryer is composed of 24m heatingsection and 4m cooling section. The drying capacity of 28m 2 deck dryer can achieve drying capacity of about 1.5m³ per hour.

The 20m single-deck veneer roller dryer has a drying capacity of 0.5-0.7m3/hour and the veneer thickness range is 0.6-8mm. The veneer roller dryer runs on the steam boiler.