38M 4 Deck Wood Veneer Dryer Machine | Roller Veneer Dryer- Shandong Shine Machinery Co.,Ltd

38M 4 Deck Wood Veneer Dryer Machine

The biomass burner is Shine patented product. It can burn all kinds of waste wood directly to reduce the drying cost mostly. Compared to steam type or heat conduction oil type veneer dryer, the drying cost is reduced greatly.The drying capacity of the 4deck 38m veneer dryer can reach 5 m3/ h.The composite cost is only about $6-12/cubic meter, which can improve customers profit space greatly.

4 Deck 38M Veneer Roller Dryer Description

4 deck veneer roller dryer is our main product for high-end customers to meet the higher capacity requirements of customers, which has the salient features of higher drying capacity. The rollers use φ102 steel special shaft tube. The bearings of the 4 deck veneer dryer are featured high temperature 500 degree Celsius resistance and low temperature -20 degree Celsius resistance which no need injecting oil and easy maintenance in the daily operation.

veneer drying machine is the most efficient drying methods, which can be used to dry all kinds of hard wood and soft wood veneer etc. 38m 4 deck veneer dryer is divided into 34m heating section and 4m cooling section. Shine veneer dryer machine running on biomass burner has lowest drying cost with high production capacity.This direct heating of hot air causes no heat loss compared to the indirect heating of water or oil.The temperature inside the wood veneer dryer machine is enough to reduce the moisture content to a proper level.The drying cost can be as low as $6 -$12 per square meter.

4deck veneer roller dryer

high end 4 deck veneer dryer

automatic veneer feeder Roller Veneer Dryer

Main Technical Parameters

Model No	GTH30-38
Working Width	3000mm
Roller material	Q235B,φ102 seamless steel pipe
Number of decks	4
Heating area length	36m
Cooling area length	4m
Veneer thickness	0.6-8mm
Veneer water moisture	From about 50-80% to about 10%
Heating material & drying temperature	Waste wood, 140-200℃ adjustable. Temperature control accuracy ±5℃. There is automatic temperature control and speed regulation system ,which can guarantee the moisture content is consistent.
Drying capacity (m³/h)	65-75cbm per day
Veneer transport speed	5-22m/min，16A chain
Hot air blower	Power:5.5KW（12pc）
Traction motor	Power: 4KW（3pc）
Cold air blower	Power: 5.5KW（2pc）
Air intake fan	Power : 11KW（1pc）
6 ton biomass burner	Power: 20KW
Automatic veneer feeding system (optional)	Power :24.2kw
Automatic Veneer collecting system (optional)	Power :6.2kw
Total power	154.4KW
Actual electricity consumption	About 90-100kw per hour

4 Deck 38M Veneer Roller Dryer Advantages

1. Shine biomass veneer dryer has the features of high productivity, energy efficiency, lowest drying cost and perfect drying effect. The composite cost is only about $6 -12/cubic meter, which can improve customers’ profit space greatly.

2. The bearings of 4 deck veneer dryer are featured high temperature 500 degree Celsius resistance and low temperature -20 degree Celsius resistance, which no need inject oil and easy maintenance in the daily operation.

3. Shine heat exchanger adopts step by step heat transfer, and the specifications of each section of the heat exchanger is different, and the hot air in the heat exchanger can be uniformly emitted to the veneer. The veneer after drying has uniform moisture content, flat, no buckle or end waviness; free of splits and the surface is in good condition for gluing.

4. Shine veneer dryer adopts automatic electric control and frequency conversion system, which can adjust the transmission speed and temperature automatically according to different veneer thickness and moisture content to achieve ideal drying effect. Equipped with automatic veneer feeder and automatic collection system, which not only improves the drying efficiency but also saves labor cost mostly.

5. The veneer after drying has uniform moisture content and it is flat without buckle or end waviness, free of splits and the surface is in good condition for gluing. Shrinkage and casehardening is kept to a minimum and collapse and honeycomb are avoided.

6. We have a professional R&D team that can design different models according to customer’s special requirement. Perfect after-sale service system can supply 24h online service, remote operation is available on request, regular customer visits, sufficient spare parts supply in time.

Project Cases

Other Matching Products