Product Description

For the thin veneer, the mesh belt dryer will be more suitable. The mesh belt veneer dryer is used for drying veneers with rotary cutting and slicer and it is designed especially to dry the very thin face veneer typically at 0.2-1.2mm thickness. The drying capacity of 26m 2deck veneer dryer can achieve 1.5-2m³/h. The veneer after drying is flat, moisture content is up to national standard. We can customize the dryer models and design the right dryer for customers according to the specific drying capacity, veneer thickness and moisture content requirement.  

Main Technical Parameter 

Product Advantages

1. Drying Slicer veneer, Stay log lathe/half round slicer veneer, rotary peeling face veneer.

2. Reliable operation, longer service life, energy efficient and unmatched performance.

3. Mesh belt dryer is a closed-belt dryer. Its feature is that only the feed end and the discharge end are open, and the others are closed. Hot air flows through the equipment and the heat loss is low, which can save a lot of energy.

4. The equipment is flexible in configuration, and there are many materials for drying at one time, and it can be continuously produced and dried, which is convenient to use and greatly reduces labor.

5. The structure is simple, easy to install, can run for a long time, can enter the interior of the box for maintenance when the fault occurs, and the maintenance is convenient.

6. The veneer after drying has uniform moisture content and it is flat without buckle or end waviness.

7. The veneer after drying is free of splits and the surface is in good condition for gluing.

8. Shrinkage and casehardening is kept to a minimum and collapse and honeycomb are avoided.

9. The veneer dryer is equipped with automatic control system with merits of saving labor cost, high drying efficiency, easy operation and low failure rate. Main electrical appliances are selected international brands.

10. Less maintenance is required for this type of Dryers with no Veneer Jamming leading to lesser Downtime.

11. We have a professional R&D team that can make customized design according to customer’s special requirement. 

12. After-sales service: remote operation is available on request, Network interactive services, regular customer visits, skilled service team can solve the failure at the first time.

Project Cases