20M 2 Deck Stainless Steel Mesh Belt Veneer Dryer

The mesh belt veneer dryer is one of the main equipments in plywood production. It is composed of four parts, which are divided into feeding area, heating area, cooling area and discharging area. The 20m 2 deck mesh belt veneer dryer can dry 1-1.5m³/h and the veneer afer drying can achieve better drying effect.

Product Description

The mesh belt veneer dryer adopts 304 stainless steel to reduce the pollution of veneer,which is one of the main equipment in plywood production used to dry the veneer with thickness under 1.5mm.Hot air passes through the veneer, vaporizes the moisture of the veneers, and part of the wet steam is discharged from the box, and the other part is recycled.So it can improve the heat utilization rate.The mesh belt dryer contains feeding area, heating area, cooling area and discharging area.

Mesh Belt Veneer Dryer Wood Veneer Dryer

Main Technical Parameter

Model No.

Shine-20

Working Width

3000mm

Layers

2 deck

Heating Section

9 sections×2000mm＝18000mm

Cooling Section

1 section×2000mm＝2000mm

Veneer feeding section

1500mm

Veneer discharge section

1500mm

Total Power

47KW

Transmission Motor

4KW (2pcs) ,frequency control

Hot air fan

4KW (9pcs)

Cold air fan

3KW (1pc)

Radiator

L 2000mm×W 300mm×H 900mm (9pcs)

Transmission speed

1-30m/min

Heating Medium

Steam or thermal oil

Drying temperature

150-180℃

Thermal energy consumption

120×10⁴ Kcal Steam 2-3T

Drying Thickness

0.2-4mm

Initial moisture content

60-80%

Final moisture content

8-12%

Drying capacity(m³/h)

1-1.5

Mesh belt material

Stainless steel infrared photoelectric off tracking

Mesh dimension

Length 200m ×Width 2.7m

Mesh

25mm×25mm

Roller diameter

89mm

Roller Space

1000mm

Roller Quantity

144pcs

Air Pipe

Length 3000×Width 380×Height 120mm (1mm thickness)

Air Pipe quantity

160pcs

Overall Dimension

L 23m(feeding1.5m+drying and cooling 21m+discharge 1.5m)×W 4.36m×H 2.2m

Container

1X40’HQ+1X20’HQ

Product Advantages

1. Drying slicer veneer, stay log lathe/half round slicer veneer, rotary peeling face veneer.

2. Reliable operation, longer service life, energy efficient and unmatched performance.

3. Mesh belt dryer is a closed-belt dryer. Its feature is that only the feed end and the discharge end are open, and the others are closed. Hot air flows through the equipment and the heat loss is low, which can save a lot of energy.

4. The equipment is flexible in configuration, and there are many materials for drying at one time, and it can be continuously produced and dried, which is convenient to use and greatly reduces labor.

5. The structure is simple, easy to install, can run for a long time, can enter the interior of the box for maintenance when the fault occurs, and the maintenance is convenient.

6. The veneer after drying has uniform moisture content and it is flat without buckle or end waviness.

7. The veneer after drying is free of splits and the surface is in good condition for gluing.

8. Shrinkage and casehardening is kept to a minimum and collapse and honeycomb are avoided.

9. The veneer dryer is equipped with automatic control system with merits of saving labor cost, high drying efficiency, easy operation and low failure rate. Main electrical appliances are selected international brands.

10. Less maintenance is required for this type of dryers with no veneer jamming leading to lesser Downtime.

11. We have a professional R&D team that can make customized design according to customer’s special requirement.

12. After-sales service: remote operation is available on request, network interactive services, regular customer visits, skilled service team can solve the failure at the first time.

Project Cases